this valve is thin and alumina dense phase pipeline system pressure tank supporting the special valves. Adopt pneumatic device operation of valves open and close, with the valve shut in position feedback signal switch, but to realize the remote operation and automatic control system work procedures. Electromagnetic valve with the dust function, especially for more environment with dust.
于新海電解鋁1920x600_副本.gif "xinhaihb")
Pneumatic Bell-type Valves
Over-low-pressure Safe Valves
Type: AQF
Specification: the main technical characteristics:
Nominal diameter: DN300mm
Nominal pressure: PN0.25 Mpa
Applicable temperature: 90 ℃ than
Applicable medium: gas powder gas mixture
Product description: this valve is installed in electrolytic aluminum powder conveying silo used to control the top and adjust internal pressure silo safety device, the product structure design is unique, call valve and the suction valve disc pressure are as heavy hammer type structure, keep open pressure is constant, not affected by temperature change, open height, use time length and other factors. Stable performance, reliability, service life long.
Pneumatic/Manual Single-board Regulating Valves
Type: TJF-D/S
Specification: technical performance:
Nominal diameter: DN500 ~ 600 mm
Applicable medium: smoke, and air, etc
Applicable temperature: 200 ℃ than
Product description: pneumatic/manual veneer regulator is installed in the flue gas pipelines, used to adjust and control gas flow; Also can be used in other collection system for gas flow rate of the adjustment and the control.
Pneumatic Rotary Material Cut-off Valves
Cylinder-type blanking devices
Specification: technical performance:
Set capacity: 1.8 L < or by user needs to make >
The capacity precision: 1%
At least cycle: 6 seconds/time
Applicable medium: alumina powder, powder particles
Applicable temperature: more than 150 ° C
Product description: this company is under cavitation device designed for electrolytic aluminum plant cell add raw materials (alumina powder) and design of the feeder under. It by cylinder body feeder, composition, structure design unique feeder ontology, advanced technology, without the wire wheel, need not the blow air, with the superior vena don't store material and reliable sealing, not leak materials, long service life, replace the cylinder is convenient wait for a characteristic.
Wafer Plugboard Material Cut-off Valves
Electric Rectangle Valve
The F-series electric rectangle valves manufactured by our company are speci?caldesigned to control the opening and closing of gas medium with low corrosiveness andlarge ?ow rate. Two-stage worm wheel reduction box installed in the electric rectangle valvehas a large output torque. The angular transducer installed on the valve body can display the opening of the valve. F839-series electric rectangle valves can be matched with KJB (P)and KGB (P) valve controllers manufactured by our company. As to KGB (P) valve controller, the control component adopts photoelectric insulation measures to make the safety voltage among the inputting, outputting and bottom shell exceeding 2KV. The inside of the various valve controllers is instal ed with overheat protection device, overcurrent protection device and open-phase protection device, which protect the electric rectangle valve as much as possible. Meanwhile the valve controller can be matched with resistance type, electromagnetic type and photoelectric type angular transducers to display the opening of the valve and also to complete distant automatic control and local manual control.
Characteristics:
1. Electric rectangle valve adopts multi-valve-plate design with small opening and closing torque; the drive motor power is below 1.5KW.
2. The valve adopts phosphor copper belt between the valve plates for sealing, with good sealing effects and little air leakage.
副本 - 1300x7000.jpg "xinhaihb")
地址：中國(guó).遼寧大連普蘭店區(qū)皮口E-mail：xinhaihb@126.com 郵編：116222